VersaFlex FSS 50DM FR is a fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer spray coating developed for applications requiring a flame resistant coating. FSS 50DM FR is Class 1 Flame resistant approved and may used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on metal and other substrates. FSS 50DM FR produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1,000 mils without appreciable sag or runs. FSS 50DM FR may be applied in all positions and to any properly prepared surface. FSS 50DM FRis inert, it will not hydrolyze, leach, or contaminates other materials, and is bondable and paintable. FSS 50DM FR is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions.

VersaFlex FSS 50DM FR is a superior flame resistant material that resists ignition, will self-extinguish if ignited and is designed specifically for industrial applications receiving constant or intermittent attack from various chemcials, most corrosive substrates and abrasive action. FSS 50DM FR may be used to coat any properly prepared substrate. FSS 50DM FR is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or without reinforcements,FSS 50DM FR may be used in transitional areas with confidence. FSS 50DM FR may be used in interior or exterior applications. FSS 50DM FR is recommended for repair of other films, may be applied to metal and other substrates, in new construction and in cold weather conditions.

  • Class 1 Flame Resistant Approved Material
  • Odorless, no VOC’s
  • 1:1 mix ratio by volume
  • Fast return to service
  • Rapid gel time
  • Installation temperature range from -40°F to 300°F
  • Operating temperatures -40°F to 350°F
% SolidsShore D HardnessTensile Strength, psiTensile Elongation, %Modulus of Elasticity, kpsiTear Strength, pliTaber Abrasion, mg wt lossApplication Temp, °FService Temp, °FGel TimeTack Free
10035 - 402000 - 2800280 - 3600.8 - 1.5300 - 450150¹ - 250¹-40° - 300°-40° - 350°6 - 9 seconds50 - 60 seconds

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22