polyurea containment liners recyclableVersaFlex FlexTain 60 is a pre-sprayed composite panel system comprised of non-woven polypropylene geotextile and a 100% solids pure polyurea membrane system.  FlexTain 60may be used by itself or in combination with other materials to produce wearing courses and resilient surfaces on a variety of substrates.  FlexTain 60 membrane panel systems are inert; panel components will not hydrolyze, leach, or contaminate other materials, and surfaces are bondable and paintable.FlexTain 60 panel systems are relatively moisture and temperature insensitive, allowing installation in the most problematic ambient conditions. Standard FlexTain panels utilize a 10 oz. geotextile to insure durability and protect against handling damage. The standard 15’ X 40’, square foot panels weigh approximately 200 pounds and can be conveniently moved and handled by the field crew. The 8” seaming edge strips provide sufficient overlap to allow quality installation even in the most difficult geometries.conditions.

VersaFlex FlexTain 60 is a superior composite 60 mil liner designed specifically for industrial applications receiving intermittent attack from contained materials. FlexTain 60 is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or without reinforcements,FlexTain 60 may be used in transitional areas in interior or exterior applications.

  • 100% solids, no VOC’s
  • Ease of installation
  • Tough, Seamless Elastomeric Membrane
  • Pre-manufactured robotically in a controlled environment
  • Excellent thermal stability
  • Minimal downtime
  • Arrives to project fully cured and ready for installation
  • Remains Flexible in Colder Temperatures
  • Good UV stability
  • Reduced material waste
  • Low permeance rate
  • Good resistance to a wide range of chemical attack
  • Installation temperature range from -40°F to 350°F
% SolidsShore A HardnessTensile Strength, psiTensile Elongation, %Modulus of Elasticity, psiTear Strength, pliTaber Abrasion, mg wt lossBurst Stregth, lbfPuncture Resistance, lbfApplication Temp, °FFull Cure, open to use
10077 - 852000 +100 - 1601750 - 3300365 - 535180¹41565 - 70-40° - 350°60 minutes

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22