EPA Test Method 9090A A bevy of tests performed by CRT Laboratories to determine VersaFlex’s ability to meet the SW-846 Test Method 9090A: Compatibility Test for Wastes and Membrane Liners. Test Method 9090A is used to determine the effects of chemicals in a surface impoundment, waste pile, or landfill on the physical properties of FML…
ISO 9001 Certification VersaFlex is an ISO 9001:2015 Certified Company. This certification covers our complete business cycle, from selection of vendors through distribution of product to our customers. Our goal is to provide the highest quality products to exceed our customer’s expectations. We do this through continuous and strategic improvements of our internal processes, product…
QUV Weatherometer Testing: (ASTM G 53) QUV Weatherometer accelerated testing (ASTM G 53) has been used as a tool to evaluate the performance of polyurea spray elastomer systems. By using this technique, one can observe the physical affects of simulated sunlight on the surface properties of the exposed elastomer as well as physical property retention.…
FSS 45DC™: Direct Food Contact Certification Coating Extraction Tests SAMPLE DESCRIPTION: The Client submitted a cured black polyurea coating identified as FSS 45DC™. REQUEST: Determine compliance of the coating to 21CFR 175.300 for contact with nonacid aqueous food products, under high temperature heat-sterilized use conditions. METHOD: The sample was subjected to the extraction test outlined in…
VF 340™: Class I Flame Resistant Certification ACCREDITATION: To ISO/IEC 17025 for a defined Scope of Testing by the International Accreditation Service SPECIFICATIONS OF ORDER: Determine the Flame Spread and Smoke Developed Indices based upon a single test conducted in accordance with ASTM E 84-12c, as per VersaFlex Inc. Purchase Order No. L062813-JW1 and Exova…
FSS 50DM™: Direct Food Contact Certification Determine compliance of the coating to FDA extraction tests for Condition B use with Type II food SAMPLE DESCRIPTION: The Client submitted twelve 1/2 pint jars coated with VersaFlex FSS 50DM™, Project 13-0089. REQUEST: Determine compliance of the coating to FDA extraction tests for Condition B use with type…
AquaVers™: Barrier Material Meeting NSF/ANSI 61.5 Specifications Product Certification: The following products have been evaluated by TRUESDAIL LABORATORIES, INC., and found to meet the specifications of: NSF/ANSI 61-5 (Barrier Material) Product: Polyurea Interior/Lining Barrier System for Tanks, Vessels, Storage Containers, and Pipes That Are Used for Potable/Drinking Water Standard: NSF/ANSI 61-5 (2011) Certificate Expires: 12/31/2022…
VF 380™ Approval from Florida Department of Environmental Protection RE: DEP Approval of the VersaFlex VF-380™ [and PV-380*] coatings, File No. EQ-686 The Bureau of Petroleum Storage Systems as concluded its review of the Equipment Approval request dated September 24, 2007, that was submitted for the above referenced coatings pursuant to Rule 62-762.851, Florida Administrative…