RoughGuard™ drum setsVersaFlex ROUGHGUARD™ is a fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer spray coating material. ROUGHGUARD is used by itself or in combination with other materials to produce liners on metal and other composite bed substrates. Its extremely fast gel time makes it suitable for applications down to -20°F without special conditioning of the component resins and isocyanates. ROUGHGUARD produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1000 mils without appreciable sag or runs. ROUGHGUARD may be applied in all positions and to any suitably prepared substrate. ROUGHGUARD is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. ROUGHGUARD is relatively moisture and temperature insensitive, allowing uses in all weather. VersaFlex ROUGHGUARD is an extreme performance system for bed liners.

ROUGHGUARD is flexible, accommodating movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or without reinforcements, ROUGHGUARD may be used in transitional areas with confidence. ROUGHGUARD may be used in interior or exterior applications. Being aromatic based, some color fade may occur in outdoor applications. ROUGHGUARD is also recommended for repair of other bedliner systems (with proper preparation), may be applied to metal and other composite bed substrates.

  • 100% Solids, No VOC’s
  • Flexible, > 250% Elongation
  • Excellent Thermal Stability
  • Good Resistance to a Wide Range of General Chemical Exposure, pH range of 4 to 14
  • Coat Most Metals without Primer
  • Fast set for Nice Surface Texture / Stipple
  • Seamless Elastomer
  • Remains Flexible in Cold Temperatures
  • Return Project to Service in 60 Minutes
  • Cures From -20oF to 225oF
  • Odorless, No Toxic Vapors
% SolidsShore D HardnessTensile Strength, psiTensile Elongation, %Modulus of Elasticity, kpsiTear Strength, pliTaber Abrasion, mg wt lossApplication Temp, °FGel TimeTack FreeFoot Traffic
100502000 - 2900200 - 2750.8 - 1.5375 - 45070¹ - 145¹-20° - 225°3 - 4 seconds6 - 10 seconds60 minutes

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22