VersaFlex GelFlex® is a 100% solids, color stable, aliphatic polyurea coating system. GelFlex may be applied directly to properly prepared substrates and may be used as a topcoat for existing epoxy, polyurethane, polyester or polyurea. GelFlex is extremely color stable and displays excellent UV weathering characteristics. GelFlex may be applied in temperatures as low as 20° F. When fully cured, GelFlex will produce a highly abrasion resistant, high-gloss, smooth finish coating. GelFlex may be used over most conventional substrates requiring some flexibility.

GelFlex® FR is ideal for any exterior environment requiring color stability or where an existing coating needs new life, and has the added benefit of being a flame retardant.

  • Flame Retardant
  • Fast cure, 100% solids, no VOC’s
  • High tensile strength, extremely high abrasion resistance
  • Color stable, excellent UV stability
  • Low odor
  • Cures as low as 20°
  • High gloss finish
  • USDA & FSIS approved
  • No styrene additives
  • Does not require wet sanding or buffing
  • Operating temperatures -15° to 140°
Shore D HardnessTensile Strength, psiTensile Elongation, %Modulus of Elasticity, kpsiTear Strength, pliTaber Abrasion, mg wt lossApplication Temp, °FService Temp, °FGel TimeTack Free
50 - 603000 - 40004 - 50.135 - 0.165390 - 475200¹ - 250¹20°-15° - 140°2 - 3 minutes15 minutes

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22