Accessories

Joint Fill / Sealant Accessories

VersaFlex recommends the following accessories for our self-leveling Joint Fillers and Sealants.

Nuts & Static Mix Wands

AST Aluminum Nut

AST Polypropylene 1/2 inch Nut

Static Mixing Wand 1/2 inch X 30 Element  #161-230

Caulking Wand 3/8″ inch X 32 element  MS10-32

Dual Component Guns

B26T600 Albion Manual Caulk Gun 300x300ML

AT600-S Albion Pneumatic Caulk Gun 300x300ML

E18T600 Albion 18V, Twin 300/300ML Caulk Gun Battery Powered

Extra Battery Only – part # 982-2, Twin Caulk Gun Battery (for E18T600)

600 Series B-Line Manual Multi-Component Cartridge Gun (1:1) & (2:1)

B26T600-ManualThrust: 900lbf

Pressure: 167 psi

Drive: Manual

Capacity: 300 x 300 ml

Line: B-Line

Mix Ratio: 1:1

Albion’s most popular 2-component model for 1:1 mix ratio 300 X 300ml cartridges.  Can also be converted to 2:1 ratio 300 X 150ml with parts included.

B-Line Multi-Component Dispensing Gun with smooth & powerful High Thrust 26:1 Ratio Drive. Albion’s legendary Double Gripping Plates and steel trigger means increased durability.

For dispensing epoxies & adhesives for construction joints, crack injection, adhesive installation and bolt setting (chemical anchoring).

Thin or Thick materials. Albion’s adjustment screw technology means increased life of the gun – as the tool wears you can adjust the screw to eliminate wasted motion.

600 Series AT Line Air-Powered Multi-Component Cartridge Gun (1:1, Standard Configuration)

AT600-PneumaticThrust: 1130 lbf

Pressure: 90 psi

Drive: Air

Capacity: 300 x 300 ml

Line: AT-Line

Mix Ratio: 1:1

  • Ergonomic design – Two-hand operation with improved control means easier and more comfortable material dispensing.
  • Faster flow increases productivity – More power from a 4″ diameter cylinder dramatically increases the flow of material.
  • Responsive – Improved trigger control, easy access regulator, and pneumatic forward and reverse.
  • Adaptable – Quickly change over from one-hand to two-hand configurations.
  • Easy reload – Truly functional upright position allows easy load and unload.
  • Rugged construction – Albion’s legendary quality and state-of-the-art engineering ensures that the tool can handle rugged conditions.

E18T600: 600 Series Cordless Multi-Component Cartridge Gun (1:1) 18-Volt – NEW!

E18T600-CordlessThrust: 950lbf

Pressure: 167 psi

Drive: Cordless

Capacity: 300 x 300 ml

Mix Ratio: 1:1

  • Our powerful 18V cordless drive system coupled to a sturdy carriage for dispensing of 300 X 300ml twin cartridges.
  • Flow control – instant drive disengagement when trigger is released
  • Ergonomic design – reduces wrist strain
  • Supplied fully assembled.  Kit Includes:
    • (1) 982-2 18V Lithium-Ion Battery Pack
    • (1) 982-3 Charger for 18V Lithium-Ion Battery (30 minute)
  • Improvements over Albion 2nd generation cordless guns:
    • Generates 50% more force (950 lbs.)
    • Constant flow with no motor oscillation
    • More robust gear case
    • More efficient motor
    • Li-Io Battery is 50% lighter than NiCad model
    • 40% longer run time compared to NiCad with no fade
    • 50% faster recharge (30 minutes)
    • Wider operating temperature – down to 0°F
    • Fuel gauge shows how much charge is left in battery
    • More battery shock resistance means longer life

Powered by Milwaukee® REDLITHIUM™ Battery Technology

Concrete Repair Accessories

VersaFlex recommends the following accessories when using our Concrete Repair systems: Quick Mender® & Quick Mender® L.O..

Spray Manifold # 7701282 – (goes with wand # 7700920)

Spray Wand # 7700920 – 3/8 in. X 10 in. X 24 Element (goes with manifold # 7701282)

Flow Restrictor part # 121296  (for QMLO Static Mixing Wand #160-624)

QM LO Static Mixing Wand #160-624.1/4 in. x 7.5″ L  INCLUDE Flow Restrictor part # 121296  with each wand