VersaFlex Waterborne Urethane is a color stable, waterborne urethane used for coating or sealing. It may be applied directly to most substrates and may be used as a topcoat for existing coatings, including polyurea systems. Waterborne Urethane displays excellent UV weathering characteristics and is abrasion and chemical resistant. The product is to be applied in a thin film (5 mils or less). Apply in multiple applications when thicker applications are needed. WBG 250 is high gloss, while WBS 252 is semi-gloss.

WBG 250 and WBS 252 can also be used as an anti-graffiti system — after applying as a top coat, removal of unwanted marks, paint, or other blemishes is accomplished through a simple cleaning with soap and water.

This material is temperature and cold sensitive. Material shall be maintained between 45° – 95°F (7° – 35°C) during transport for material preservation. Material is to be stored in accordance with local regulations. Store in original container protected from direct sunlight in a dry and well-ventilated area, away from incompatible materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not reseal contaminated containers. Uncontaminated containers, free of moisture, may be resealed only after placing under a nitrogen blanket.

  • No VOC’s
  • Non Toxic
  • Easy to apply
  • Low odor
  • High gloss or semi-gloss formulations
  • Superior color & gloss retention
% SolidsTensile Strength, psiTensile Elongation, %Modulus of Elasticity, kpsiTear Strength, pliTaber Abrasion, mg wt lossWorking TimeTack FreeFoot Traffic
624400 - 72003 - 5%0.175 - 0.3150 - 30025* - 260¹60 minutes60 - 120 minutes7 days

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22

Previous slide Next slide