VersaFlex SL/75 is a self-leveling, 100% solids, flexible, two component, rapid curing polyurea elastomer joint filler. Designed for 10-15% movement of installed joint width. Recommended concrete cure a minimum of 28 days prior to installing joint filler or joint sealant.

VersaFlex SL/75 is used to fill interior random cracks, control joints or new construction joints on horizontal concrete surfaces. SL/75 is designed specifically for industrial floor applications receiving heavy vehicle traffic, such as forklift or steel wheeled carts. SL/75 is flexible, accommodating small slab movement yet strong enough to protect the vertical edges of concrete from spalling under extreme loading. SL/75 can be used in exterior applications where little joint or crack movement from thermal cycling will occur. SL/75 is recommended for repair of cracks, damaged control joints or new construction joints in cold storage facilities, freezers, and food processing plants where time and temperature are serious concerns.

  • Cures From -20° to 200°F
  • 100% Solids, Meets VOC Regulations
  • Remains Flexible in Cold Temperatures
  • Odorless, No Toxic Vapors
  • Resists Jet Fuel
  • USDA/FSIS Approved
  • CFIA Approved
% SolidsShore A HardnessTensile Strength, psiTensile Elongation, %Modulus of Elasticity, kpsiTear Strength, pliTaber Abrasion, mg wt lossApplication Temp, °FGel TimeTack FreeFoot Traffic
10075600 - 1200240 - 5000.4 - 0.9150 - 300375¹ - 500¹-40° - 200°60 seconds2 -3 minutes60 minutes

Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22