VersaFlex VF 380 provides less shrinkage with improved elongation characteristics. As a result, VF 380 makes an excellent polyurea for liners, geotextile coatings, and applications where resilience and durability are required. VF 380 may be applied at thicknesses in a single application using a multi-pass spray technique.
- Extremely Low Shrinkage
- High Elongation
- Designed for use in Geotextile settings
| % Solids | Shore A Hardness | Tensile Strength, psi | Tensile Elongation, % | Modulus of Elasticity, kpsi | Tear Strength, pli | Moisture Vapor Transmission, perms | Taber Abrasion, mg wt loss | Application Temp, °F | Gel Time | Tack Free |
|---|---|---|---|---|---|---|---|---|---|---|
| 100 | 80 - 85 | 900 - 1900 | 350 - 390 | 0.5 - 1.9 | 300 - 450 | 0.02 | 8* - 18* | -40° - 350° (dry) | 10 - 18 seconds | 160 - 180 seconds |
Abrasion loss: Tested at (1000 g, 1000 revs) *CS-17 / ¹H-18 / †H-22
Project Profiles
Aalborg Zoo, Elephant Habitat: VF 380 Pure Polyurea
Burlington WWTP: VF-380 Over Spray Foam
City of Dubois Entryway: VF 380 + Crumb Rubber
Commercial Roof System : VF 380 (over single-ply)
Edmonton Garrison: VF 380 + Geotextile Fabric
Fort Nelson: VF 380 Pre-Manufactured Geotextile Panels
Fresh Water Swimming Hole: VF 380 Pure Polyurea
MidAmerica Coatings: VF 380 + Geotextile
Petro-Canada GOT: VF 380 + Geotextile Fabric